HOW TO FLASH STOCK FIRMWARE (.FTF/ROM) ON YOUR SONY XPERIA

Share:

If you are reading this, you are definitely looking for how to flash stock firmware on your sony xperia. Well, you have landed on the right page. Here on this page, I am going to walk you through how to successfully flash stock firmware on your sony xperia.

1. Download and Install sony mobile flasher on your PC. Skip if you have one on your PC Already





2: Once installation is complete, navigate to the folder where FlashTool is installed as shown in the picture below


2a: This is optional if you want to create a shortcut to the desktop


3: Now install the driver for the Xperia Z. The driver installer can be found in the FlashTool folder See pictures below:




4: Now for Flashing your Xperia Z. You will need to download the STOCK .ftf (firmware/ROM) and place it in the firmware folder located in the flashtool folder



5: Now for flashing. Run the FlashTool app. Make sure that it's in "Flashmode" and click "Ok"



6: This window should show up. Please select the ROM you are gonna flash. And follow the prompts


  Please, it is important you FOLLOW the prompts! The picture below says:
1:Unplug your device from your PC
2:Power OFF the device (Turn your phone OFF)
3:Hold down the VOLUME DOWN button
4:While holding the VOLUME DOWN button plug your phone back to your PC


The process should look like this. Please wait until it is finished See pictures below:



And that is it, you are all done. Power up your Sony Xperia  and enjoy your new stock ROM.
Do you have any problem while following this guide, pls reach out to us via the comment box.


No comments